1 files changed, 0 insertions, 121 deletions
diff --git a/bird1/files/bird4.conf b/bird1/files/bird4.conf
deleted file mode 100644
index 8616a0a..0000000
--- a/bird1/files/bird4.conf
+++ /dev/null
@@ -1,121 +0,0 @@
-
-# THIS CONFIG FILE IS NOT A COMPLETE DOCUMENTATION
-# PLEASE LOOK IN THE BIRD DOCUMENTATION FOR MORE INFO
-
-# However, most of options used here are just for example
-# and will be removed in real-life configs.
-
-log syslog all;
-
-# Override router ID
-#router id 192.168.0.1;
-
-# Turn on global debugging of all protocols
-#debug protocols all;
-
-
-# Define a route filter...
-# filter test_filter {
-#	if net ~ 10.0.0.0/16 then accept;
-#	else reject;
-# }
-
-# The direct protocol automatically generates device routes to all network
-# interfaces. Can exist in as many instances as you wish if you want to
-# populate multiple routing tables with device routes. Because device routes
-# are handled by Linux kernel, this protocol is  usually not needed.
-# protocol direct {
-#	interface "*";	# Restrict network interfaces it works with
-# }
-
-# This pseudo-protocol performs synchronization between BIRD's routing
-# tables and the kernel. You can run multiple instances of the kernel
-# protocol and synchronize different kernel tables with different BIRD tables.
-protocol kernel {
-#	learn;			# Learn all alien routes from the kernel
-#	persist;		# Don't remove routes on bird shutdown
-	scan time 20;		# Scan kernel routing table every 20 seconds
-#	import none;		# Default is import all
-#	export all;		# Default is export none
-}
-
-# This pseudo-protocol watches all interface up/down events.
-protocol device {
-	scan time 10;		# Scan interfaces every 10 seconds
-}
-
-# Static routes (again, there can be multiple instances, so that you
-# can disable/enable various groups of static routes on the fly).
-protocol static {
-#	export all;		# Default is export none
-#	route 0.0.0.0/0 via 62.168.0.13;
-#	route 10.0.0.0/8 reject;
-#	route 192.168.0.0/16 reject;
-}
-
-
-#protocol rip {
-#	disabled;
-#	import all;
-#	export all;
-#	export filter test_filter;
-
-#	port 1520;
-#	period 7;
-#	infinity 16;
-#	garbage time 60;
-#	interface "*" { mode broadcast; };
-#	honor neighbor;
-#	honor always;
-#	honor never;
-#	authentication none;
-#}
-
-
-#protocol ospf {
-#	disabled;
-#	import all;
-#	export all;
-#	export where source = RTS_STATIC;
-
-#	area 0 {
-#		interface "eth*" {
-#			cost 10;
-#			hello 3;
-#			retransmit 2;
-#			wait 5;
-#			dead 20;
-#			type broadcast;
-#			authentication simple;
-#			password "pass";
-#		};
-#	};
-#}
-
-
-#protocol bgp {
-#	disabled;
-#	import all;
-#	export all;
-#	export where source = RTS_STATIC;
-
-#	local as 65000;
-#	neighbor 192.168.1.1 as 65001;
-#	multihop 20 via 192.168.2.1;
-
-#	hold time 240;
-#	startup hold time 240;
-#	connect retry time 120;
-#	keepalive time 80;	# defaults to hold time / 3
-#	start delay time 5;	# How long do we wait before initial connect
-#	error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
-#				# errors occur, we increase the delay exponentially ...
-#	error forget time 300;	# ... until this timeout expires)
-#	disable after error;	# Disable the protocol automatically when an error occurs
-#	next hop self;		# Disable next hop processing and always advertise our local address as nexthop
-#	source address 62.168.0.14;	# What local address we use for the TCP connection
-#	password "secret"	# Password used for MD5 authentication
-#	rr client;		# I am a route reflector and the neighor is my client
-#	rr cluster id 1.0.0.1	# Use this value for cluster id instead of my router id 
-#	};
-#}