summaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* hostapd: ACS: Fix typo in bw_40 frequency arrayopenwrt-23.05David Bauer2024-01-191-0/+25
| | | | | | | | | | | | [Upstream Backport] The range for the 5 GHz channel 118 was encoded with an incorrect channel number. Fixes: ed8e13decc71 (ACS: Extract bw40/80/160 freqs out of acs_usable_bwXXX_chan()) Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 56d7887917102877ed2f03414f7ed812a29d6b39)
* mac80211: do not emit VHT160 capabilities if channel width is less than 160 MHzFelix Fietkau2024-01-091-0/+5
| | | | | | | Fixes compatibility issues with VHT160 capable clients Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 80e4e2285fdf4a7b19c84532deafe2d1e690ed30)
* hostapd: add missing NULL pointer check on radar notificationFelix Fietkau2024-01-091-0/+3
| | | | | | | Fixes a race condition that can lead to a hostapd crash Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit d864f68232e910f2c8ab06a66347fc08c257dfcc)
* mac80211: avoid crashing on invalid band infoDavid Bauer2024-01-091-0/+34
| | | | | | | | | | | | | | | | Frequent crashes have been observed on MT7916 based platforms. While the root of these crashes are currently unknown, they happen when decoding rate information of connected STAs in AP mode. The rate-information is associated with a band which is not available on the PHY. Check for this condition in order to avoid crashing the whole system. This patch should be removed once the roout cause has been found and fixed. Link: https://github.com/freifunk-gluon/gluon/issues/2980 Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1278d47beaabaa963b2956e81936269b7fea4003)
* linux/modules: remove deprecated moduleJohn Audia2024-01-081-2/+1
| | | | | | | | | | Remove upstream deprecated module from our build, see[1] 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.145&id=6cd90c01b032f335d18966b2d979eef43eb2cfc1 Suggested-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 5067863d67e4585f166133e1b9d6e482fde4c80f)
* mac80211: add missing newline for "min_tx_power"Rany Hany2024-01-051-1/+1
| | | | | | | | This prevents min_tx_power from functioning properly in some circumstances. Add the missing newline. Signed-off-by: Rany Hany <rany_hany@riseup.net> (cherry picked from commit 6ca8752a9cadac810f8541ec1be67d02265175aa)
* mediatek: add support for Routerich AX3000Mikhail Zhilkin2024-01-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is continuation of work under "mediatek: add support for Routerich AX3000" #13703 by the agreement with PR #13703 original author (Maximilian Weinmann <x1@disroot.org>). All reviews from the previous PR were taken into into account. Routerich AX3000 is a wireless WiFi 6 router. Specification ------------- - SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz - RAM : DDR3 256 MiB (ESMT M15T2G16128A) - Flash : SPI-NAND 128 MiB (ESMT F50L1G41LB) - WLAN : MediaTek MT7976CN dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) - USB : 1x 2.0 - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n8) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x WiFi 2.4 GHz (Blue) 1x WiFi 5 GHz (Red) 1x Mesh (Blue) 3x LAN activity (Blue) 1x WAN activity (Blue) 2x WAN no-internet (Red) - Power : 12 VDC, 1.5 A Installation ------------ Flash OpenWrt 'sysupgrade.bin' image using stock firmware web-interface (without keeping settings). Return to stock --------------- Install stock firmware image (without keeping settings) using OpenWrt sysupgrade method. Recovery -------- Connect uart, use u-boot menu to flash stock firmware image or boot OpenWrt initramfs image. MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 24:0f:5e:xx:xx:b4 | label | | LAN | 24:0f:5e:xx:xx:b5 | label+1 | | WLAN 2g | 24:0f:5e:xx:xx:b6 | label+2 | | WLAN 5g | 24:0f:5e:xx:xx:b7 | label+3 | +---------+-------------------+-----------+ The WLAN 2g MAC was found in 'Factory', 0x4 Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit 485adc9d3c436d31f9713a7d8d84adf266754e26) [Fix merge conflict in uboot-envtools] Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: add support for Rostelecom RT-FE-1AMikhail Zhilkin2024-01-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rostelecom RT-FE-1A is a wireless WiFi 5 router manufactured by Sercomm company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB Flash: 128 MiB Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2 Wireless 5 GHz (MT7615E): a/n/ac, 4x4 Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4) USB ports: No Button: 2 buttons (Reset & WPS) LEDs: - 1x Power (green, unmanaged) - 1x Status (green, gpio) - 1x 2.4G (green, hardware, mt76-phy0) - 1x 2.4G (blue, gpio) - 1x 5G (green, hardware, mt76-phy1) - 1x 5G (blue, gpio) - 5x Ethernet (green, hardware, 4x LAN & WAN) Power: 12 VDC, 1.5 A Connector type: barrel Bootloader: U-Boot Installation ----------------- 1. Login to the router web interface (default http://192.168.0.1/) under "admin" account 2. Navigate to Settings -> Configuration -> Save to Computer 3. Decode the configuration. For example, using cfgtool.py tool (see related section): cfgtool.py -u configurationBackup.cfg 4. Open configurationBackup.xml and find the following block: <OBJECT name="User." type="object" writable="1" encryption="0" > <OBJECT name="1." type="object" writable="1" encryption="0" > <PARAMETER name="Password" type="string" value="<some value>" writable="1" encryption="1" password="1" /> </OBJECT> 5. Replace <some value> by a new superadmin password and add a line which enabling superadmin login after. For example, the block after the changes: <OBJECT name="User." type="object" writable="1" encryption="0" > <OBJECT name="1." type="object" writable="1" encryption="0" > <PARAMETER name="Password" type="string" value="s0meP@ss" writable="1" encryption="1" password="1" /> <PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/> </OBJECT> 6. Encode the configuration. For example, using cfgtool.py tool: cfgtool.py -p configurationBackup.xml 7. Upload the changed configuration (configurationBackup_changed.cfg) to the router 8. Login to the router web interface (superadmin:xxxxxxxxxx, where xxxxxxxxxx is a new password from the p.5) 9. Enable SSH access to the router (Settings -> Access control -> SSH) 10. Connect to the router using SSH shell using superadmin account 11. Run in SSH shell: sh 12. Make a mtd backup (optional, see related section) 13. Change bootflag to Sercomm1 and reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 reboot 14. Login to the router web interface under admin account 15. Remove dots from the OpenWrt factory image filename 16. Update firmware via web using OpenWrt factory image Revert to stock --------------- Change bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 mtd backup ---------- 1. Set up a tftp server (e.g. tftpd64 for windows) 2. Connect to a router using SSH shell and run the following commands: cd /tmp for i in 0 1 2 3 4 5 6 7 8 9; do nanddump -f mtd$i /dev/mtd$i; \ tftp -l mtd$i -p 192.168.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done tftp -l mtd.md5 -p 192.168.0.2 MAC Addresses ------------- +-----+------------+---------+ | use | address | example | +-----+------------+---------+ | LAN | label | f4:*:66 | | WAN | label + 11 | f4:*:71 | | 2g | label + 2 | f4:*:68 | | 5g | label + 3 | f4:*:69 | +-----+------------+---------+ The label MAC address was found in Factory, 0x21000 cfgtool.py ---------- A tool for decoding and encoding Sercomm configs. Link: https://github.com/r3d5ky/sercomm_cfg_unpacker Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit f3cdc9f9881796794c06f784a2e4790f5ed75d1f)
* mac80211: fix a race condition related to enabling fast-xmitFelix Fietkau2024-01-041-0/+34
| | | | | | | | | | | fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 438a97fab69b41387e25cbec45271e7fe159a330)
* netifd: update to Git openwrt-23.05 (2024-01-04)Felix Fietkau2024-01-042-36/+4
| | | | | | | | | | | | | | | | | | c739dee0a37b system-linux: refresh MAC address on DSA port conduit change 8587c074f1eb interface-ip: fix IPv4 route target masking 33d6c261aacb system-linux: fix bogus debug error messages on adding bridge members 0832e8f04778 wireless: add bridge_isolate option 5ca7a9058e98 bridge: fix reload on bridge vlan changes be4ffb3b78bc bridge: rework config change pvid handling 923c4370a1d4 system-linux: set master early on apply settings b9442415c785 system-linux: skip refreshing MAC on master change if custom MAC b635a09cdadf system-linux: set pending to 0 on ifindex found or error for if_get_master 2bbe49c36224 device: Log error message if device initialization failed 2703f740a23e Revert "system-linux: set pending to 0 on ifindex found or error for if_get_master" 9cb0cb418303 system-linux: fix race condition in netlink socket error handing c18cc79d5000 device: restore cleared flags on device down Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: increase default receive window sizeDavid Bauer2024-01-031-0/+6
| | | | | | | | | | | | Increasing the receive window size improves throughout on higher-latency links such as WAN connections. The current default of 24KB caps out at around 500 KB/s. Increasing the receive buffer to 256KB increases the throughput to at least 11 MB/s. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f95eecfb21ff08662e022accd30e8254028ff63b)
* mwlwifi: update to version 10.4.10-20231120Michael Trinidad2023-12-146-126/+525
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream PR 416 improvements: -AMPDU Optimization of priority calculation. (8864/8897) -8864/8897 fix wpa3 -Add cypher suite to driver capabilities (all chip) -Alignment of pcie_tx_ctrl* (all chip) -"feature" normalization for all chips (all chip) -Add modprobe parameters (all chip) -fix monitoring (all chip) -Code separation by chipset (8864/8897 <=> 8997) -dump_prob decommissioning (8864/8897/8997) -fix amsdu high ping latency (8864/8897/8997) -drop debug info in hostcmd_get_hw_spec() (8864/8897) -Add wcb_base in debug info (8864) -Rewrite AMSDU packets (8864/8897/8997) -debug rewrite output mwl_debugfs_sta_read (all chip) -Improved encryption interoperability (8864/8897/8997) -factorization encrypted packet test (8864/8897/8997) -Change 88W8864 firmware to 7.2.9.27 (8864/8897) -Fix the AMPDU session lifecycle (8864/8897/8997) -Remove the tx done packets mechanism (8864/8897) Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
* mt76: Add firmware package for MT7922Daniel Danzberger2023-12-141-0/+14
| | | | | | | | Adds the 2 required firmware files for MT7922 chips. Signed-off-by: Daniel Danzberger <dd@embedd.com> (cherry picked from commit 9eecf4905375777e2048177dbe4d83fee5da9ee1) Signed-off-by: Anya Lin <hukk1996@gmail.com>
* lua5.3: fix typo calling lua53 instead of lua5.3 for Package DefaultChristian Marangi2023-12-101-3/+3
| | | | | | | | | | | Fix typo calling lua53 instead of lua5.3 for Package Default definition. This cause only missing description of the package and doesn't cause any build regression. Fixes: c52ca08d4008 ("lua5.3: build shared library") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 25e215c14ee6c9f3d54cd1da46a48d9ffe6b254e)
* mediatek: add support for Zbtlink ZBT-Z8102AXDaniel Golle2023-12-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SoC: MediaTek MT7981B RAM: 1024MiB Flash: SPI-NAND 128 MiB Switch: 1 WAN, 4 LAN (Gigabit) USB: two M.2 slots for 5G modems via USB 3.0 hub, external USB 3.0 port Buttons: Reset, Mesh Power: DC 12V 1A WiFi: MT7976CN UART: 115200n8 UART Layout: VCC-RX-TX-GND Installation: A. Through OpenWrt Dashboard: If your router comes with OpenWrt preinstalled (modified by the seller), you can easily upgrade by going to the dashboard (192.168.1.1) and then navigate to System -> Backup/Flash firmware, then flash the firmware B. Through TFTP Standard installation via UART: 1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin). 2. Power on the router. Make sure that you can access your router via UART. 3. Restart the router then repeatedly press ctrl + c to skip default boot. 4. Type > bootmenu 5. Press '2' to select upgrade firmware 6. Press 'Y' on 'Run image after upgrading?' 7. Press '0' and hit 'enter' to select TFTP client (default) 8. Fill the U-Boot's IP address and TFTP server's IP address. 9. Finally, enter the 'firmware' filename. Based on patch adding support for similar Zbtlink ZBT-Z8103AX device by Ian Ishmael C. Oderon. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit c8c2f522625c8d9eb5acad317e3de7a6b156decf)
* uboot-mediatek: add JCG Q30 PRO supportChukun Pan2023-12-083-0/+434
| | | | | | | | The vendor uboot will verify firmware at boot. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit b42c5272286ee248c698cc2cfac88df1bf51cbe3)
* ucode: adjust module dependenciesJo-Philipp Wich2023-12-081-1/+1
| | | | | | | | | Let ucode-mod-* packages select the ucode interpreter instead of depending on it to avoid recursive dependency chains in unrelated packages. Fixes: https://github.com/openwrt/packages/issues/22837 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 01d1c1ad296cc71f87ea02b01b16a09fe5d933a1)
* mt76: drop default eeprom file for mt7986-firmwareChukun Pan2023-12-071-2/+0
| | | | | | | | | | The mt76 driver usually reads the eeprom on the mtd partition at dts. For emmc device we need to use caldata_extract script to read the eeprom. However, the default eeprom file breaks the caldata script execution, so remove it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit e3aa645b267ca4f08773b5366583e9b0020fc3e9)
* uboot-mediatek: fix typo in bootmenu for GL-MT6000Jianhui Zhao2023-12-071-1/+1
| | | | | | | | Fixes: b530d492a9d9 ("filogic: add support for GL.iNet GL-MT6000") Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com> (cherry picked from commit 4536fb4c5c7b3564dae301529bb0ac4a3ce914b8) [rmilecki: fix commit hash in Fixes] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* filogic: add support for GL.iNet GL-MT6000Jianhui Zhao2023-12-073-0/+291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: * SoC: MediaTek MT7986A 4x A53 * Flash: 8GB EMMC * RAM: 1GB DDR4 * Ethernet: * 2x2.5G RJ45 port (RTL8221B) * 4x1G RJ45 ports (MT7531AE) * WLAN: * 2.4GHz: MT7976GN 4T4R * 5GHz: MT7976AN 4T4R * Button: Reset * LED: 1 x dual color LED * USB: 1 x USB 3.0 * Power: DC 12V 4A * UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC) * JTAG: 9 PIN If you want to use u-boot from OpenWrt, you can upgrade it safely. * bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin * fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip `openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com> (cherry picked from commit fe10f9743935d6986e80e7cb082469e6bc5a03f0)
* mediatek: filogic: add support for Ubiquiti UniFi 6 Plus (U6+)Elbert Mai2023-12-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ubiquiti U6+ is a dual-band WiFi 6 PoE access point. It is a drop-in upgrade of the U6 lite. Specifications --- - SoC: MediaTek MT7981A dual-core ARM Cortex-A53 1.3 GHz - RAM: 256 MB DDR3-2133 RAM - Flash: 16 MB SPI NOR and 4 GB eMMC - LAN: 1x Gigabit Ethernet with 802.3af/at support - WLAN: MediaTek MT7976C 2x2 MIMO dual-band WiFi 6 - LEDs: 1x blue and 1x white - Buttons: 1x reset button Installation --- 1. Power device using a PoE injector or switch 2. Connect via Ethernet to the device with static IP 192.168.1.2 3. SSH into the device with password: ubnt $ ssh ubnt@192.168.1.20 4. Unlock kernel partitions for writing $ echo 5edfacbf > /proc/ubnthal/.uf 5. Confirm correct partitions $ grep PARTNAME /sys/block/mmcblk0/mmcblk0p6/uevent PARTNAME=kernel0 $ grep PARTNAME /sys/block/mmcblk0/mmcblk0p7/uevent PARTNAME=kernel1 $ grep PARTNAME /sys/block/mmcblk0/mmcblk0p8/uevent PARTNAME=bs 6. Set and confirm bootloader environment $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd_real "run boot_openwrt" $ fw_printenv 7. Copy sysupgrade image to /tmp/openwrt.bin via scp 8. Copy kernel and rootfs to mmcblk0p6 and mmcblk0p7, respectively $ tar xf /tmp/openwrt.bin sysupgrade-ubnt_unifi-6-plus/kernel -O | dd of=/dev/mmcblk0p6 $ tar xf /tmp/openwrt.bin sysupgrade-ubnt_unifi-6-plus/root -O | dd of=/dev/mmcblk0p7 9. Ensure device boots from mmcblk0p6 $ echo -ne "\x00\x00\x00\x00\x2b\xe8\x4d\xa3" > /dev/mmcblk0p8 10. Reboot the device $ reboot Signed-off-by: Elbert Mai <code@elbertmai.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 75ee5546e9b7cfa5bbfd6f844ab8c5fffd5bb594)
* mediatek: add support for Cetron CT3003Patricia Lee2023-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **Hardware specification:** - SoC: MediaTek MT7981B 2x A53 - Flash: ESMT F50L1G41LB 128MB - RAM: Nanya NT5CC128M16JR-EK 256MB - Ethernet: 4 x 10/100/1000 Mbps - Switch: MediaTek MT7531AE - WiFi: MediaTek MT7976C - Button: Reset, Mesh - Power: DC 12V 1A - UART: 3.3v, 115200n8 | Layout: | | :-------- | | <Antenna> | | VCC | | GND | | Tx | | Rx | **Flash instructions:** 1. Rename `openwrt-mediatek-filogic-cetron_ct3003-squashfs-factory.bin` to `factory.bin`. 2. Upload the `factory.bin` using the device's Web interface. 3. Click the upgrade button and wait for the process to finish. 4. Access the OpenWrt interface using the same password. 5. Use the 'Restore' function to reset the firmware to its initial state. **Notes:** If you plan to recovery the stock firmware in the future, it's advisable to connect the device via the serial port and enter failsafe mode to back up all the MTD partitions before proceeding the steps above. Signed-off-by: Patricia Lee <patricialee320@gmail.com> (cherry picked from commit 907e9e0bd3df456b32921893cf6ef1b54117d983)
* filogic: support Telenor branded ZyXEL EX5700Bjørn Mork2023-12-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Telenor quirks -------------- The operator specific firmware running on the Telenor branded ZyXEL EX5700 includes U-Boot modifications affecting the OpenWrt installation. Notable changes to U-Boot include - environment is stored in RAM and reset to defaults when power cycled - dual partition scheme with "nomimal" or "rescue" systems, falling back to "rescue" unless the OS signals success in 3 attempts - several runtime additions to the device-tree Some of these modifications have side effects requiring workarounds - U-Boot modifies /chosen/bootargs in an unsafe manner, and will crash unless this node exists - U-Boot verifies that the selected rootfs UBI volume exists, and refuses to boot if it doesn't. The chosen "rootfs" volume must contain a squashfs signature even for tftp or initramfs booting. - U-Boot parses the "factoryparams" UBI volume, setting the "ethaddr" variable to the label mac. But "factoryparams" does not always exist. Instead there is a "RIP" volume containing all the factory data. Copying the "RIP" volume to "factoryparams" will fix this Hardware -------- SOC: MediaTek MT7986 RAM: 1GB DDR4 FLASH: 512MB SPI-NAND (Mikron xxx) WIFI: Mediatek MT7986 802.11ax 5 GHz Mediatek MT7916 DBDC 802.11ax 2.4 + 6 GHz ETH: MediaTek MT7531 Switch + SoC 3 x builtin 1G phy (lan1, lan2, lan3) 2 x MaxLinear GPY211C 2.5 N-Base-T phy (lan4, wan) USB: 1 x USB 3.2 Enhanced SuperSpeed port UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.2/24. Rename the image to C0A80101.img. 2. Connect the TFTP server to lan1, lan2 or lan3. Connect to the serial console, Interrupt the autoboot process by pressing ESC when prompted. 3. Download and boot the OpenWrt initramfs image. $ env set uboot_bootcount 0 $ env set firmware nominal $ tftpboot $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Missing features ---------------- - The "lan1", "lan2" and "lan3" port LEDs are driven by the switch but OpenWrt does not correctly configure the output. - The "lan4" and "wan" port LEDs are driven by the GPH211C phys and not configured by OpenWrt. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 6cc14bf66aa924962b926ea9702b6153ae418a7d)
* base-files: support parse DT LED color and functionShiji Yang2023-12-061-0/+31
| | | | | | | | | | The 'label' property in led node has been deprecated and we'd better to avoid using it. This patch allows us to extract DT OF LED name from the newly introduced LED properties "color", "function" and "function-enumerator". Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit e814acc59948943c776ac319a348f72c0d19f33c)
* firmware-utils: update to Git HEAD (2023-11-21)Rafał Miłecki2023-11-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1d42292d8063 tplink-safeloader: Add TP-Link Archer A6 V3.20 3338f5389d72 tplink-safeloader: add TL-WPA8635P v3 17ca5eeb1c10 tplink-safeloader: add TL-WPA8631P v4 f730ad2fa0b4 bcmblob: new tool for reading Broadcom's BLOBs cb1ddac98124 firmware-utils: fix typo in error message when no OpenSSL library found 916633160dc9 bcmclm: new tool for reading Broadcom's CLM data a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1 bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5 The special_id values are the same for EU and Asian models, and they apply to all models: v1, v2, and v3. They are not sorted as they are currently in the same order as extracted from the official firmware image. 9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1 a170683c0e11 firmware-utils: fix use of NULL string progname 89875fc18b57 tplink-safeloader: CPE510: add Canadian support 9e211d2980fe mktplinkfw2: add support to extract bootloader images c18f662f3c74 mktplinkfw2: add support to pack bootloader 3dc133915f87 mktplinkfw2: show exact exceed bytes when the image is to big d16ff798d58a tplink-safeloader: WPA8631: add v4 AU, US 0fa1cc51013f zytrx: add LTE5398-M904 635466123429 firmware-utils: ptgen: add SiFive GPT partition support ba5bc4e1ae9d add dlink-sge-image for D-Link devices by SGE 3b114de29cf7 lxlfw: move code opening LXL to helper function 8e149e480391 lxlfw: move code copying data to helper function 16fa89076122 lxlfw: fix struct lxl_hdr attribute d770cab82e58 lxlfw: support embedding blobs eaf2ea28dbe6 lxlfw: support extracting image 12bf1a99bd6e lxlfw: support certificate & signature blobs Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b117e7244f9e85cc3e6f6845f81eb60c9c9331e1)
* firmware-utils: package oseamaRafał Miłecki2023-11-246-944/+8
| | | | | | | | It's required by bcm53xx. This allows dropping separated oseama package and avoids some code duplication. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1d9d0ca376c616a2cede9d30f370aa0c2f7984e6)
* firmware-utils: new package replacing otrxRafał Miłecki2023-11-242-46/+33
| | | | | | | | | | | | | | Some of firmware utils may be required on target devices. It's useful e.g. for dealing with some firmware formats. That is often required (supporting specific format) to provide an option to revert to original firmware. So far we had packaged "otrx" util only for use on Broadcom targets. Refactor that to package the whole firmware-utils project so we can package any single util needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 24d6abe2d7cd8b93ee5e390af8d90eda54611dd1)
* OpenWrt v23.05.2: revert to branch defaultsHauke Mehrtens2023-11-151-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.2: adjust config defaultsv23.05.2Hauke Mehrtens2023-11-151-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netifd: fix IPv4 route target maskingJo-Philipp Wich2023-11-142-1/+33
| | | | | | | | | A previous commit supposed to mask out excess host bits in route targets failed to correctly calculate the mask value, causing it to produce improper results for certain mask lengths. Fixes: https://github.com/openwrt/netifd/issues/17 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-envtools: add environment config for MeiG SLT866Daniel Golle2023-11-131-0/+1
| | | | | | | Add configuration to access U-Boot environment on MeiG SLT866. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit f8414f1a6fa0b784117353a93d821fa923da1aaf)
* OpenWrt v23.05.1: revert to branch defaultsHauke Mehrtens2023-11-121-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.1: adjust config defaultsv23.05.1Hauke Mehrtens2023-11-121-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iptables: backport patch fixing bug with string moduleChristian Marangi2023-11-122-1/+41
| | | | | | | | Backport patch fixing critical bug with string module merged upstream. Fixes: #13812 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 3d6b89c5140acb9228ec89bde09b53dafdead070)
* wolfssl: update to 5.6.4Nick Hainke2023-11-112-27/+2
| | | | | | | | | | | Releae Notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.4-stable Remove upstreamed patch: - 001-fix-detection-of-cut-tool-in-configure.ac.patch Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit d83231603c60a1df7d0530c8766f0b71c6553b44)
* netifd: update to the latest versionFelix Fietkau2023-11-111-3/+3
| | | | | | | | | eee02ccca8c8 device: add support to configure eee bb28f6a291d9 wireless: fix sign comparison warning 35facc8306f5 wireless: fix premature removal of hotplug devices due to down state Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit d45d72a6da004a557a2b39793c84174b33f0500c)
* netifd: update to Git HEAD (2023-11-09)Christian Marangi2023-11-111-3/+3
| | | | | | | | | | 841b05fbb91e system-linux: fix compilation error if IFLA_DSA_MASTER is not supported 5c9ecc1ff74f system-linux: make system_if_get_master_ifindex static 2dc7f450f3a2 system-linux: add option to configure DSA conduit device 838f815db5ef system-linux: add support for configurable GRO option Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1714087442bb61591fe60a375f39b39abd657e25)
* ipq-wifi: update to Git HEAD (2023-11-10)Christian Marangi2023-11-101-4/+4
| | | | | | | | | | | | | | | | | | | c9db9d0b3027 ipq8074: add Asus RT-AX89X BDF 33154283e54a ipq8074: update RegDB in new submitted BDF 2b034415ac3d ipq40xx: add YYeTs LE1 BDF a9c253ebe926 ipq8074: add Netgear WAX620 Board file for Netgear WAX620, extracted from stock (bdwlan.b290) firmware and repacked. ec0960967999 qca-wireless: ipq40xx: add BDFs for ZTE MF287 57aa1b1562ac ipq8174: Add Linksys MX4200 52a1c2940605 ipq8074: add Netgear WAX630 Board file for Netgear WAX630. Extracted from stock (WAX630_BDF.bin) firmware and repacked. e7701b85d46d ipq8074: update RegDB in new submitted BDF cd04ab7f984f qcn9074: update RegDB in new submitted BDF f70fdf9438ae ipq8074: add Arcadyan AW1000 BDF 21c4d976b1e6 ipq8074: add CMCC RM2-6 BDF f92fa0a2bdcf ipq8074: add ZTE MF269 BDF 371d4dce9b9a ipq8074: add Yuncore AX880 BDF 0c2e810e71ed qcn9074: fix prpl Foundation Haze BDF for old mac80211 version Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ucode: update to Git HEAD (2023-11-07)Jo-Philipp Wich2023-11-091-3/+3
| | | | | | | | 0352a33 uloop: support new interval and signal APIs 1468cc4 syntax: don't treat `as` and `from` as reserved keywords Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 551963662b3c2d4a740a447855da410c0f217152)
* hostapd: refresh patchesChristian Marangi2023-11-094-10/+10
| | | | | | | Refresh patches for hostapd using make package/hostapd/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 05e516b12d4463e40df6d97a03bc6aa621c245f5)
* hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscanChristian Marangi2023-11-091-0/+9
| | | | | | | | | | | | | | Currently for 802.1s only, for wifi 2.4GHz in g/n mode, 40MHz is never permitted. This is probably due to the complexity of setting periodic check for the intolerant bit. When noscan option is set, we ignore the presence of the intoleran bit in near AP, so we can enable 40MHz and ignore any complex logic for checking. Fixes: #13112 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 6c9ac57d58ab0d2c71fb51120a2166b7e0bd7183)
* hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUSChristian Marangi2023-11-091-1/+1
| | | | | | | | Also channel 7 for 2.4GHz can be set to HT40PLUS. Permit this and add it to the list of the channels. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit b1c7b1bd67ca40289dfb7acd03e12ce43618d548)
* hostapd: fix broke noscan option for meshChristian Marangi2023-11-092-3/+3
| | | | | | | | | | noscan option for mesh was broken and actually never applied. This is caused by a typo where ssid->noscan value is check instead of conf->noscan resulting in the logic swapped and broken. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1b5ea2e199fcf391f88afd0322de449459399be4)
* mac80211: fix not set noscan option for wpa_supplicantChristian Marangi2023-11-091-1/+1
| | | | | | | | | noscan option was changed to hostapd_noscan but the entry in wpa_supplicant was never updated resulting in the noscan option actually never set. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1070fbce6e496da2dacf17c6e842a4369c4be71b)
* px5g-wolfssl: Fix permission of private keyHauke Mehrtens2023-11-082-17/+30
| | | | | | | | | | | | | | | | | | Store the private key with read and write permission for the user only and not with read permissions for everyone. This converts the write_file() function from fopen() to open() because open allows to specify the permission mask of the newly created file. It also adds and fixes some existing error handling. OpenSSL does this in the same way already. With this change it looks like this: root@OpenWrt:/# ls -al /etc/uhttpd.* -rw-r--r-- 1 root root 749 Nov 6 23:14 /etc/uhttpd.crt -rw------- 1 root root 121 Nov 6 23:14 /etc/uhttpd.key Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 6aad5ab0992fefd88ce612bc0484e0115a004572)
* px5g-mbedtls: Fix permission of private keyHauke Mehrtens2023-11-082-10/+27
| | | | | | | | | | | | | | | | | | Store the private key with read and write permission for the user only and not with read permissions for everyone. This converts the write_file() function from fopen() to open() because open allows to specify the permission mask of the newly created file. It also adds and fixes some existing error handling. OpenSSL does this in the same way already. With this change it looks like this: root@OpenWrt:/# ls -al /etc/uhttpd.crt /etc/uhttpd.key -rw-r--r-- 1 root root 519 Nov 6 22:58 /etc/uhttpd.crt -rw------- 1 root root 121 Nov 6 22:58 /etc/uhttpd.key Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 929c9a58c9a17a3ca8d2a3be0c5dc4ac98e848e2)
* hostapd: use rtnl to set up interfacesFelix Fietkau2023-11-083-5/+11
| | | | | | | In wpa_supplicant, set up wlan interfaces before adding them Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit c2a30b6e01aa756cd7d50c578ab4344c725ecc59)
* wifi: fix applying mesh parameters when wpa_supplicant is in useFelix Fietkau2023-11-083-26/+71
| | | | | | | | Apply them directly using nl80211 after setting up the interface. Use the same method in wdev.uc as well Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 531314260d2e50e984e1671f88662b469dffb16e)
* netifd: update to the latest versionFelix Fietkau2023-11-081-3/+3
| | | | | | | | | | | | 383753dd65ae device/bridge: support passing extra vlans in the device_set_state call b6e75eafc1af device: send notifications for device events via ubus cab415c7aefd bridge: add auth-required bridge members with auth_status=0 if vlan is enabled 827a02f0343c bridge: add support for configuring vlans for auth=1,auth_status=false 40ed7363caf2 device: fix build error on 32 bit systems 516ab774cc16 system-linux: fix race condition on bringing up wireless devices Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 41d7439af5a40a71a0deb2075fa133b61b0e478a)
* mediatek: add CMCC RAX3000M supportTianling Shen2023-11-071-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 64GB eMMC or 128 MB SPI-NAND RAM: 512MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Mesh Power: DC 12V 1A - UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | GND TX VCC RX | <= | | ----------------- | -------------------------- Gain SSH access: 1. Login into web interface, and download the configuration. 2. Enter fakeroot, decompress the configuration: tar -zxf cfg_export_config_file.conf 3. Edit 'etc/config/dropbear', set 'enable' to '1'. 4. Edit 'etc/shadow', update (remove) root password: 'root::19523:0:99999:7:::' 5. Repack 'etc' directory: tar -zcf cfg_export_config_file.conf etc/ * If you find an error about 'etc/wireless/mediatek/DBDC_card0.dat', just ignore it. 6. Upload new configuration via web interface, now you can SSH to RAX3000M. Check stroage type: Check the label on the back of the device: "CH EC CMIIT ID: xxxx" is eMMC version "CH CMIIT ID: xxxx" is NAND version eMMC Flash instructions: 1. SSH to RAX3000M, and backup everything, especially 'factory' part. ('data' partition can be ignored, it's useless.) 2. Write new GPT table: dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync 3. Erase and write new BL2: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/dev/zero of=/dev/mmcblk0boot0 bs=512 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync 4. Erase and write new FIP: dd if=/dev/zero of=/dev/mmcblk0 bs=512 seek=13312 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync 5. Set static IP on your PC: IP 192.168.1.254, GW 192.168.1.1 6. Serve OpenWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt has booted, perform sysupgrade. 9. Additionally, if you want to have eMMC recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) dd if=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb of=/dev/mmcblk0p4 bs=512 conv=fsync NAND Flash instructions: 1. SSH to RAX3000M, and backup everything, especially 'Factory' part. 2. Erase and write new BL2: mtd erase BL2 mtd write openwrt-mediatek-filogic-cmcc_rax3000m-nand-preloader.bin BL2 3. Erase and write new FIP: mtd erase FIP mtd write openwrt-mediatek-filogic-cmcc_rax3000m-nand-bl31-uboot.fip FIP 4. Set static IP on your PC: IP 192.168.1.254, GW 192.168.1.1 5. Serve OpenWrt initramfs image using TFTP server. 6. Cut off the power and re-engage, wait for TFTP recovery to complete. 7. After OpenWrt has booted, erase UBI volumes: ubidetach -p /dev/mtd0 ubiformat -y /dev/mtd0 ubiattach -p /dev/mtd0 8. Create new ubootenv volumes: ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 9. Additionally, if you want to have NAND recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) ubimkvol /dev/ubi0 -n 2 -N recovery -s 20MiB ubiupdatevol /dev/ubi0_2 openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb 10. Perform sysupgrade. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 423186d7d8b4f23aee91fca4f1774a195eba00d8) [rebased to 23.05] Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
generated by cgit (git 2.46.0) at 2026-10-12 04:58:15 +0000