diff options
Diffstat (limited to 'target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch')
| -rw-r--r-- | target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch b/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch new file mode 100644 index 0000000000..0d284c3d24 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch @@ -0,0 +1,78 @@ +From 30dd62191d3dd97c08f7f9dc9ce77ffab457e4fb Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Fri, 8 Dec 2023 15:51:56 +0100 +Subject: [PATCH 09/13] net: phy: at803x: move specific at8031 config_intr to + dedicated function + +Move specific at8031 config_intr bits to dedicated function to make +at803x_config_initr more generic. + +This is needed in preparation for PHY driver split as qca8081 share the +same function to setup interrupts. + +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++------ + 1 file changed, 24 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -990,7 +990,6 @@ static int at803x_ack_interrupt(struct p + + static int at803x_config_intr(struct phy_device *phydev) + { +- struct at803x_priv *priv = phydev->priv; + int err; + int value; + +@@ -1007,10 +1006,6 @@ static int at803x_config_intr(struct phy + value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED; + value |= AT803X_INTR_ENABLE_LINK_FAIL; + value |= AT803X_INTR_ENABLE_LINK_SUCCESS; +- if (priv->is_fiber) { +- value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; +- value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; +- } + + err = phy_write(phydev, AT803X_INTR_ENABLE, value); + } else { +@@ -1617,6 +1612,29 @@ static int at8031_set_wol(struct phy_dev + return ret; + } + ++static int at8031_config_intr(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ int err, value = 0; ++ ++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED && ++ priv->is_fiber) { ++ /* Clear any pending interrupts */ ++ err = at803x_ack_interrupt(phydev); ++ if (err) ++ return err; ++ ++ value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; ++ value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; ++ ++ err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value); ++ if (err) ++ return err; ++ } ++ ++ return at803x_config_intr(phydev); ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2137,7 +2155,7 @@ static struct phy_driver at803x_driver[] + .write_page = at803x_write_page, + .get_features = at803x_get_features, + .read_status = at803x_read_status, +- .config_intr = at803x_config_intr, ++ .config_intr = at8031_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, |