diff options
Diffstat (limited to 'target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch')
| -rw-r--r-- | target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch b/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch new file mode 100644 index 0000000000..c9ef6df827 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch @@ -0,0 +1,86 @@ +From 3ae3bc426eaf57ca8f53d75777d9a5ef779bc7b7 Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Fri, 8 Dec 2023 15:51:54 +0100 +Subject: [PATCH 07/13] net: phy: at803x: move specific at8031 config_init to + dedicated function + +Move specific at8031 config_init to dedicated function to make +at803x_config_init more generic and tidy things up. + +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/at803x.c | 45 ++++++++++++++++++++++------------------ + 1 file changed, 25 insertions(+), 20 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -951,27 +951,8 @@ static int at803x_hibernation_mode_confi + + static int at803x_config_init(struct phy_device *phydev) + { +- struct at803x_priv *priv = phydev->priv; + int ret; + +- if (phydev->drv->phy_id == ATH8031_PHY_ID) { +- /* Some bootloaders leave the fiber page selected. +- * Switch to the appropriate page (fiber or copper), as otherwise we +- * read the PHY capabilities from the wrong page. +- */ +- phy_lock_mdio_bus(phydev); +- ret = at803x_write_page(phydev, +- priv->is_fiber ? AT803X_PAGE_FIBER : +- AT803X_PAGE_COPPER); +- phy_unlock_mdio_bus(phydev); +- if (ret) +- return ret; +- +- ret = at8031_pll_config(phydev); +- if (ret < 0) +- return ret; +- } +- + /* The RX and TX delay default is: + * after HW reset: RX delay enabled and TX delay disabled + * after SW reset: RX delay enabled, while TX delay retains the +@@ -1604,6 +1585,30 @@ static int at8031_probe(struct phy_devic + AT803X_WOL_EN, 0); + } + ++static int at8031_config_init(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ int ret; ++ ++ /* Some bootloaders leave the fiber page selected. ++ * Switch to the appropriate page (fiber or copper), as otherwise we ++ * read the PHY capabilities from the wrong page. ++ */ ++ phy_lock_mdio_bus(phydev); ++ ret = at803x_write_page(phydev, ++ priv->is_fiber ? AT803X_PAGE_FIBER : ++ AT803X_PAGE_COPPER); ++ phy_unlock_mdio_bus(phydev); ++ if (ret) ++ return ret; ++ ++ ret = at8031_pll_config(phydev); ++ if (ret < 0) ++ return ret; ++ ++ return at803x_config_init(phydev); ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2113,7 +2118,7 @@ static struct phy_driver at803x_driver[] + .name = "Qualcomm Atheros AR8031/AR8033", + .flags = PHY_POLL_CABLE_TEST, + .probe = at8031_probe, +- .config_init = at803x_config_init, ++ .config_init = at8031_config_init, + .config_aneg = at803x_config_aneg, + .soft_reset = genphy_soft_reset, + .set_wol = at803x_set_wol, |