openwrt/target/linux, branch master

mediatek: add support for JDCloud RE-CP-03

2024-01-19T20:43:32Z

Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: 128GB eMMC RAM: 1GB DDR4 Ethernet: 4x 1GbE, 1x 2.5GbE (RTL8221B) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Joylink Power: DC 12V 2A Flash instructions: 1. Download and flash the vendor migration firmware via webUI: https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7986-jdcloud_re-cp-03-vendor-migration.bin (Default address is 192.168.68.1, user root, no password) 2. After device has booted up, write new GPT table: dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync 3. Erase and write new BL2: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/dev/zero of=/dev/mmcblk0boot0 bs=512 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync 4. Erase and write new FIP: dd if=/dev/zero of=/dev/mmcblk0 bs=512 seek=13312 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync 5. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 6. Serve OpenWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt has booted, perform sysupgrade. 9. Additionally, if you want to have eMMC recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-initramfs-recovery.itb of=/dev/mmcblk0p4 bs=512 conv=fsync Signed-off-by: Tianling Shen

rockchip: fix boot from non-MMC devices

2024-01-19T20:31:39Z

Booting from non-MMC devices on Rockchip targets without this change results in a boot failure: Model: FriendlyElec NanoPi R5S Net: eth0: ethernet@fe2a0000 Hit any key to stop autoboot: 0 ** Booting bootflow 'nvme#0.blk#1.bootdev.part_1' with script ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** Couldn't find partition mmc 0:1 Can't set block device Wrong Image Type for bootm command ERROR -91: Protocol wrong type for socket: can't get kernel image! Boot failed (err=1) This change fixes the default boot script for Rockchip targets to support booting from non-MMC devices such as NVMe or USB drives. Some targets with only a boot rom (e.g. NanoPi R5S) may require u-boot to be installed on the eMMC or a MicroSD card in order to boot from non-MMC devices. Fixes: #14420 Reviewed-by: Tianling Shen Signed-off-by: Justin Klaassen

kernel: bump 6.1 to 6.1.73

2024-01-19T20:24:44Z

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.73 Patch automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia

kernel: bump 6.1 to 6.1.72

2024-01-19T20:24:44Z

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.72 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia

mediatek: fix WED + wifi reset

2024-01-19T13:48:22Z

The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Signed-off-by: Felix Fietkau

bcm27xx: config: update documentation links

2024-01-18T08:24:52Z

The documentation links have changed and are no longer valid. Signed-off-by: Álvaro Fernández Rojas

bmips: dts: remove unneeded cferom alias

2024-01-18T07:57:43Z

This is no longer needed after nvmem-layout changes. Same as 6f328dfe19 for NAND devices. Signed-off-by: Álvaro Fernández Rojas

kernel: bump 5.15 to 5.15.147

2024-01-17T20:56:35Z

Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.147 Manually rebased: generic/backport-5.15/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia

kernel: ksmbd: only v2 leases handle the directory

2024-01-17T20:42:31Z

This backport a fix for ksmbd. Refer: https://github.com/namjaejeon/ksmbd/issues/469 Signed-off-by: Chen Minqiang

mediatek: refresh patches-6.1

2024-01-17T01:49:56Z

Refresh patches for Linux 6.1 which no longer apply cleanly after adding patches to fix ethernet rx hang issue on MT7981/MT7986. Fixes: ede34465de ("mediatek: fix ethernet rx hang issue on MT7981/MT7986") Signed-off-by: Daniel Golle