openwrt/target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi, branch main

ramips: mt7621: convert I-O DATA devices EEPROM to NVMEM format

2024-01-17T00:14:49Z

-+-------------------------------------------+- | Model | NIC | -+-------------------------------------------+- | WN-DX1167R/WN-AX1167GR2 | MT7615D | -+-------------------------------------------+- | WN-AX2033GR/WN-DX2033GR | MT7603 + MT7615 | -+-------------------------------------------+- Signed-off-by: Shiji Yang

ramips: mt7621: convert to nvmem-layout

2023-11-26T00:30:32Z

Allows replacing mac-address-increment with mac-base. Signed-off-by: Rosen Penev

ramips: enable BBT on NAND in I-O DATA devices

2022-12-30T08:12:15Z

This patch enables MediaTek NAND BBT on I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.). [WN-AX2033GR] Tested-by: Yanase Yuki [WN-AX1167GR2, WN-DX1167R, WN-DX1200GR, WN-DX2033GR] Tested-by: INAGAKI Hiroshi Signed-off-by: INAGAKI Hiroshi

ramips: mt7621-dts: mux phy0/4 to gmac1

2022-08-20T20:56:12Z

Mux the MT7530 switch's phy0/4 to the SoC's gmac1 on devices where RGMII2 pins are available. This achieves 2 Gbps total bandwidth to the CPU using the second RGMII. The ports called "wan" are muxed where possible. On a minority of devices, this is not possible. Those cases: mt7621_ampedwireless_ally-r1900k.dts: lan3 mt7621_ubnt_edgerouter-x.dts: eth0 mt7621_gnubee_gb-pc1.dts: ethblue mt7621_linksys_re6500.dts: lan1 mt7621_netgear_wac104.dts: lan4 mt7621_tplink_eap235-wall-v1.dts: lan0 mt7621_tplink_eap615-wall-v1.dts: lan0 mt7621_ubnt_usw-flex.dts: lan1 The "wan" port is just what the vendor designated on the board/plastic chasis of the device. On a technical level, there is no difference between a lan and wan port on MT7621AT, MT7621DAT and MT7621ST SoCs. Prefer connecting to WAN via the port described above for these devices to benefit the feature brought with this patch. mt7621_d-team_newifi-d2.dts cannot benefit this feature, although it looks like it should, because the rgmii2 pins are wired to unused components. Tested on a range of devices documented on the GitHub PR. Link: https://github.com/openwrt/openwrt/pull/10238 Signed-off-by: Arınç ÜNAL

ramips: convert mtd-mac-address to nvmem implementation

2021-07-19T12:51:22Z

Define nvmem-cells and convert mtd-mac-address to nvmem implementation. The conversion is done with an automated script. Signed-off-by: Ansuel Smith

ramips: remove model name from LED labels

2020-10-02T12:51:57Z

Like in the previous patch for ath79 target, this will remove the "devicename" from LED labels in ramips as well. The devicename is removed in DTS files and 01_leds, consolidation of definitions into DTSI files is done where (easily) possible, and migration scripts are updated. For the latter, all existing definitions were actually just devicename migrations anyway. Therefore, those are removed and a common migration file is created in target base-files. This is actually another example of how the devicename removal makes things easier. Signed-off-by: Adrian Schmutzler

ramips: move redundant console setup to mt7621 SoC DTSI

2020-07-17T10:14:32Z

For mt7621, console is set up via DTS bootargs individually in device DTS/DTSI files. However, 44 of 74 statements use the following setting: chosen { bootargs = "console=ttyS0,57600"; }; Therefore, don't repeat ourselves and move that definition to the SoC DTSI file to serve as a default value. This patch is cosmetic. Signed-off-by: Adrian Schmutzler

ramips: mt7621: update dts/defconfig for DSA

2020-04-04T06:40:44Z

update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang Acked-by: Jo-Philipp Wich [split commit] Signed-off-by: Chuanhong Guo

ramips: mt7621: update pinctrl nodes

2020-04-04T06:13:05Z

Upstream GPIO driver uses "groups" "function" properties Signed-off-by: DENG Qingfang

ramips: mt7621: convert GPIO dts refs

2020-04-04T06:13:05Z

The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang