openwrt, branch v23.05.0-rc2

OpenWrt v23.05.0-rc2: adjust config defaults

2023-06-27T22:08:24Z

Signed-off-by: Hauke Mehrtens

filogic: add support for Netgear WAX220

2023-06-26T11:20:39Z

Hardware -------- SOC: MediaTek MT7986 RAM: 1024MB DDR3 FLASH: 128MB SPI-NAND (Winbond) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect the TFTP server to the WAX220. Conect to the serial console, interrupt the autoboot process by pressing '0' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.2.1 $ setenv serverip 192.168.2.2 $ tftpboot openwrt.bin $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n Signed-off-by: Flole Systems Signed-off-by: Stefan Agner (cherry picked from commit 984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b)

uhttpd: update to latest git HEAD

2023-06-25T20:50:50Z

34a8a74 uhttpd/file: fix string out of buffer range on uh_defer_script Signed-off-by: Hauke Mehrtens (cherry picked from commit 7a6f6b812632a5983cd34ab5c41271d5d4de5fbf)

kernel: bump 5.15 to 5.15.118

2023-06-25T14:05:18Z

All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia (cherry picked from commit 1f5fce27c195373fedcf233a48470de97752058f)

ipq40xx: meraki-mr33, meraki-mr74: disable image generation

2023-06-25T10:34:47Z

After migrating to kernel 5.15, upgrading causes the units to become soft-bricked, hanging forever at the kernel startup. Kernel size limitation of 4000000 bytes is suspected here, but this is not fully confirmed. Disable the images to protect users from inadvertent bricking of units, because recovery of those is painful with Cisco's U-boot, until the root cause is found and fixed. Signed-off-by: Lech Perczak (cherry picked from commit 9d64cc068fbb15d9e6498c1eba79851823b2f4f5)

ramips: fix lan leds for Wavlink WL-WN535K1

2023-06-25T10:34:47Z

Previously both lan1 and lan2 leds were wrongly labelled as lan2. Moreover they were connected to the wrong lan port. Fixes 8fde82095ba0 ("ramips: add support for Wavlink WL-WN535K1") Reported-by: Nicolò Maria Semprini Signed-off-by: Davide Fioravanti (cherry picked from commit c71dada92654a53c63bbc5bebcc40fe924750ed7)

ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)

2023-06-25T10:32:50Z

Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G) modems. Specifications: * SoC: MediaTek MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * Wi-Fi: * MediaTek MT7603E : 2.4Ghz * MediaTek MT7613BE : 5Ghz * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * M.2: 1x slot with USB&SIM * EM7455/EM12-G/EM160R/RM500Q-AE * USB: 1x 3.0 Type-A port * External storage: 1x microSD (SDXC) slot * UART: console (115200 baud) * LED: * 1 power indicator * 1 WLAN 2.4G controlled (wlan 2G) * 3 SoC controlled (wlan 5G, wwan, internet) * 5 per Eth phy (4xLAN + WAN) MAC Addresses: * LAN : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex)) * WAN : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex)) * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex)) * 5 GHz : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex)) Installation: * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Recovery Mode: * Press reset button, power up the device, wait for about 10sec. * Upload sysupgrade image through the firmware recovery mode web page at 192.168.1.1. Signed-off-by: Kim DoHyoung (cherry picked from commit 0bbd5699c81d6887c4d895e85b56d8c23b1211ec)

odhcpd: bump to latest git HEAD

2023-06-24T17:09:52Z

5211264 odhcpd: add support for dhcpv6_pd_min_len parameter c6bff6f router: Add PREF64 (RFC 8781) support Signed-off-by: Christian Marangi (cherry picked from commit acd9981b4ef750544202df9d9e2d0143a6dfd478)

netfilter: fix typo in nf-socket and nf-tproxy kconfig

2023-06-23T15:47:17Z

Fix a typo where the wrong KCONFIG was used and fix selecting the correct kernel config option to use these packages. Fixes: 4f443c885ded ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy") Signed-off-by: Christian Marangi (cherry picked from commit 3ebebf08be950a8a0f3bf5b2c3db910621f2cc21)

mac80211: always use mac80211 loss detection

2023-06-22T22:23:58Z

ath10k does not report excessive loss in case of broken block-ack sessions. The loss is communicated to the host-os, but ath10k does not trigger a low-ack events by itself. The mac80211 framework for loss detection however detects this circumstance well in case of ath10k. So use it regardless of ath10k's own loss detection mechanism. Signed-off-by: David Bauer (cherry picked from commit ed816f6ba8b5e3df609e5fc53f7bcb09bdaa16be)