openwrt, branch openwrt-23.05

hostapd: ACS: Fix typo in bw_40 frequency array

2024-01-18T23:20:14Z

[Upstream Backport] The range for the 5 GHz channel 118 was encoded with an incorrect channel number. Fixes: ed8e13decc71 (ACS: Extract bw40/80/160 freqs out of acs_usable_bwXXX_chan()) Signed-off-by: Michael Lee Signed-off-by: David Bauer (cherry picked from commit 56d7887917102877ed2f03414f7ed812a29d6b39)

mediatek: fix ethernet rx hang issue on MT7981/MT7986

2024-01-16T18:41:30Z

Add patches by Lorenzo/Daniel to use QDMA instead of ADMAv2 Signed-off-by: Felix Fietkau (cherry picked from commit ede34465de2176229590028fba622d54841ab40c)

Revert "lantiq: xway: kernel: enable SMP support"

2024-01-16T12:23:11Z

Enabling SMP on the xway target results in two issues: * some danube chipset-based devices fail on boot, * on devices based on the arx100 chipset, enabling smp results in a degradation of NAT performance. After these two issues are fixed, SMP can be re-enabled. This reverts commit 084c20f6c54180f2dc6b3efc1c5ba9b62afbaf26. Fixes: #13934 Fixes: #14283 Signed-off-by: Aleksander Jan Bajkowski

mediatek: GL-MT6000: Change LED colors

2024-01-15T16:34:30Z

Fine tuning PR: openwrt/openwrt#14355 Ref: 5a82bb909bf1 ("mediatek: GL-MT6000: Add missing LED state definitions") As the only LED is using white in the stock firmware when the device is running and blue for the bootloader I suggest following changes: - Using blue for the BL and preinit+failsafe - White for normal operation (like the original FW) and sysupgrade With this changes it's clear by looking to the LED in which operation mode the device is and a possible BL stuck can be seen easily. Tested with [GL-MT6000](https://openwrt.org/toh/gl.inet/gl-mt6000). Signed-off-by: Thomas Schröder Tested-by: Hannu Nyman (cherry picked from commit 4d7bac1dcaae019fb4992bfb74348ef12c02daa4)

ath79: read back reset register

2024-01-11T00:43:20Z

Read back the reset register in order to flush the cache. This fixes spurious reboot hangs on TP-Link TL-WDR3600 and TL-WDR4300 with Zentel DRAM chips. This issue was fixed in the past, but switching to the reset-driver specific implementation removed the cache barrier which was previously implicitly added by reading back the register in question. Link: https://github.com/freifunk-gluon/gluon/issues/2904 Link: https://github.com/openwrt/openwrt/issues/13043 Link: https://dev.archive.openwrt.org/ticket/17839 Link: f8a7bfe1cb2c ("MIPS: ath79: fix system restart") Signed-off-by: David Bauer (cherry picked from commit 2fe8ecd880396b5ae25fe9583aaa1d71be0b8468)

ath79: add support for UniFi UK-Ultra

2024-01-10T03:58:33Z

Hardware -------- CPU: Qualcomm Atheros QCA9563 RAM: 128M DDR2 FLASH: 16MB SPI-NOR WiFi: Qualcomm Atheros QCA9563 2x2:2 802.11n 2.4GHz Qualcomm Atheros QCA9880 2x2:2 802.11ac 5GHz Antennas -------- The device features internal antennas as well as external antenna connectors. By default, the internal antennas are used. Two GPIOs are exported by name, which can be used to control the antenna-path mux. Writing a logical 0 enables the external antenna connectors. Installation ------------ 1. Download the OpenWrt sysupgrade image to the device. You can use scp for this task. The default username and password are "ubnt" and the device is reachable at 192.168.1.20. $ scp -O openwrt-sysupgrade.bin ubnt@192.168.1.20:/tmp/firmware.bin 2. Connect to the device using SSH. $ ssh ubnt@192.168.1.20 3. Disable the write-protect $ echo "5edfacbf" > /proc/ubnthal/.uf 4. Verify kernel0 and kernel1 match mtd2 and mtd3 $ cat /proc/mtd 5. Write the sysupgrade image to kernel0 and kernel1 $ dd if=/tmp/firmware.bin of=/dev/mtdblock2 $ dd if=/tmp/firmware.bin of=/dev/mtdblock3 6. Write the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtd4 7. Reboot the device $ reboot Signed-off-by: David Bauer (cherry picked from commit bf94e0a38389b2ce5d33be9c97d104d36dd5ebd6)

ath79: move UniFi AC template into common

2024-01-10T03:58:33Z

This allows us to embrace alphabetical sorting for the UK-Ultra. Signed-off-by: David Bauer (cherry picked from commit c9e58f85f6e5d96711291f079413d2f34c36fdc3)

mediatek: fix BPI-R3 wifi mac address

2024-01-09T14:16:58Z

Setting/clearing bits on the first byte of the mac address causes collisions when using multiple SSIDs on both PHYs. Change the allocation to alter the last byte instead. Signed-off-by: Felix Fietkau (cherry picked from commit 38bec08e87b69212daf34eac7b26d643a92d9353)

mac80211: do not emit VHT160 capabilities if channel width is less than 160 MHz

2024-01-09T13:39:22Z

Fixes compatibility issues with VHT160 capable clients Signed-off-by: Felix Fietkau (cherry picked from commit 80e4e2285fdf4a7b19c84532deafe2d1e690ed30)

hostapd: add missing NULL pointer check on radar notification

2024-01-09T10:19:45Z

Fixes a race condition that can lead to a hostapd crash Signed-off-by: Felix Fietkau (cherry picked from commit d864f68232e910f2c8ab06a66347fc08c257dfcc)